DS-2TA21-3AVF. Hikvision Thermographic Cube Camera. #ASIP Connect

• 160 × 120 (the resolution of output image is 640 × 480) resolution in thermal channel, high sensitivity sensor
• Point, line and area for temperature measurement
• Temperature range: -20°C to 150°C (-4°F to 302°F), 20°C to 350°C (68°F to 662°F); temperature accuracy: Max (±2 °C, ±2%)
• Reliable temperature exception alarm function
• 3D DNR, image detail enhancement

• Thermal
• Image SensorVOx Uncooled Focal Plane Arrays
• Resolution160×120
• Pixel Interval17μm
• Response Waveband8μm to 14μm
• NETDLess than 40 mK (@25°C,F#=1.1)
• Focal Length3.1mm
• Focus ModeAthermalized
• Field Of View50° × 37.2° (H × V)
• IFOV5.48 mrad
• Image Frequency25 hz
• ApertureF 1.1
• Min. Focusing Distance0.15 m

• Optical
• Image Sensor1/2.8” Progressive Scan CMOS
• Resolution1600 × 1200
• Focal Length2 mm
• Field Of View92.6° × 75.8° (H × V)

• Compression Standard
• Video CompressionH.264 (Baseline/Main/High Profile) /MJPEG/H.265, H.264+, H.265+
• Video Bit Rate256 Kbps to 16 Mbps

• Smart Function
• Temperature Range-20°C to 150°C (-4°F to 302°F), 20°C to 350°C (68°F to 662°F)
• Temperature AccuracyMax (±2°C, ±2%)
• Temperature Measurement RulesDisplay Max. and Min. temperature in live view; 3 temperature measurement rule types, 21 rules (10 points, 10 regions, and 1 line).

• Image
• Main StreamThermal channel: 25fps (640 × 480);Optical channel: 25fps (1600 × 1200)
• Sub StreamThermal channel: 25fps (640 × 480);Optical channel: 25fps (1600 × 1200)
• Image Enhancement3D DNR, EIS
• Image SettingRotate mode, brightness, contrast and AGC adjustable by client software or web browser

• Network
• Alarm TriggerMotion detection, video tampering alarm, network disconnected, IP address conflict, illegal login, HDD full, HDD error
• ProtocolsIPv4/IPv6, HTTP, HTTPS, 802.1x, Qos, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMP, ICMP, DHCP, PPPoE, Bonjour
• General FunctionOne-key reset, heartbeat, mirror, password protection, privacy mask, watermark, IP address filter

• Interface
• Communication Interface1 RJ45 Ethernet port, 1 RS-485 interface
• Alarm1 input, 1 output

• Thermographic Integration
• External Optics CorrectionSupport Thermal Optical Transmittance and Manual Input External Optics Temperature; Support Calibration Coefficient calculation
• Temperature Info. Of Thermographic RuleReal- time Output; Time Interval: 500 ms
• Temperature Info. Of ImageReal-time Output; Default is 4 fps, 32bit × 640 × 512 per frame; 16 bit and 32 bit are selectable
• Capture Thermal Graphic32 bit 160 × 120
• Metadata OutputMax. 25 fps (16bit 160 × 120)

• General
• Menu LanguageEnglish
• Power Supply10-30 VDC, Max. 4W PoE (802.3af, class 2)
• Working Temperature And Humidity-20 °C to 50 °C (-4 °F to 122 °F), humidity less than 95%
• Protection LevelIP 67
• Weight56 mm × 38.8 mm × 110 mm (2.20'' × 1.53'' × 4.33'')
• DimensionApprox. 335 g (0.74 lb)