         |
ASIP ENGINEERING (JB)
43A, Jalan Bukit Impian 1, Taman Impian Emas, 81300 Skudai, Johor, Malaysia.
ASIP ENGINEERING (KL)
Lot 3, Block B,
Subang Light Industrial Park,
Off Jalan Subang 2, USJ 1,
47610 Subang Jaya,
Selangor, Malaysia.
ASIP ENGINEERING (Perak)
14, Jalan Medan Ipoh 9,
Bandar Baru Medan,
31400 Ipoh,
Perak, Malaysia.
.png)
+6016-7333389
enquiry@asip.com.myEK9i. Elid Secured Keypad-Reader Interface Unit
Door Access System --- ELID ---
| Previous ‹‹ | » Next |
EK9i is designed for high security installations where security breaches cannot be compromised. This reader interface comes built in with a bright back-lit LCD and keypad to enhance system intuitiveness and user friendliness.
- Support time recording with lateness reasoning
- Reader display user name when capturing user transaction
- Up to 7 different card formats
- RS485 connectivity
- Support remote relay for output for anti-tampering
| Model | EK9i |
| Manufacturer | ELID Sdn Bhd |
| Country of Origin | Malaysia |
| Microprocessor | 16 bit MCU (MC9S12GC128) with 128K flash memory and 4K RAM |
| Bus Speed | 25.8048 MHz |
| Communication | 2 wires RS485 Interface (Data+, Data-) |
| Baud Rate | 9600bps or 57600bps |
| Protocol | Pier-to-peer collision detection protocol (E-BUS) |
| LCD Display | 16 by 1 line yellow-green screen without backlight or 16 by 2 lines blue screen with backlight |
| Keypad | 3 by 4 |
| Max. Doors Supported | 1 door |
| Standalone Operation | Partial. Can store 10 card numbers to open door when main controller is down. |
| Modes of Operation | Card, PIN, Card + PIN, Time Clock |
| Status Detection | Tamper, Battery and Alternating Current |
| Type of Reader Supported | Proximity (HID, EM, MiFare) |
| Max. Readers Supported | 2 (one IN and one OUT) |
| Onboard Inputs / Outputs | 6 Inputs, 2 Outputs |
| Operating Temperature | 0oC to 60oC |
| Humidity | 10% to 90% non-condensing |
| Power Requirements | 12VDC 100mA excluding reader |
| Casing Dimensions | 105 (L) x 80 (W) x 35 (D) |
| Casing Property | Heavy Duty PVC |
| Approximate Weight | 400grams |
