ASIP ENGINEERING (JB)
04-31, Skudai Parade
Shopping Complex,
Batu 10, Jalan Skudai,
81300 Skudai, Johor,
Malaysia.

ASIP ENGINEERING (KL)
Lot 3, Block B,
Subang Light Industrial Park,
Off Jalan Subang 2, USJ 1,
47610 Subang Jaya,
Selangor, Malaysia.


ASIP ENGINEERING (Perak)
14, Jalan Medan Ipoh 9,
Bandar Baru Medan,
31400 Ipoh,
Perak, Malaysia.

+6016-7333389

enquiry@asip.com.my

xPortalNet. MicroEngine Alarm Monitoring System. #ASIP Connect

     Door Access System ---    MICROENGINE    ---

Previous ‹‹ » Next

xPortalNet. MicroEngine Alarm Monitoring System. #ASIP Conne

xPortalNet. MicroEngine Alarm Monitoring System. #ASIP Connect

The xPortalNet system supports alarm monitoring system. It uses the following MicroEngine’s alarm extension boards:
  • XP-SNET-E32R – 32 Relay Outputs
  • XP-SNET-E248S – 24 Supervised Inputs and 8 Relay Outputs

The XP-SNET controller will automatically process the alarm messages and react in accordance to the Instruction Control configured in the xPortalNet software even without the intervention of the security officer.

Unlike conventional digital input sensors, the sensor inputs connected to our extension boards are electronically supervised. The XP-SNET controller is able to detect whether the sensor wire has been bypassed or cut as long as the sensor is properly installed following our installation guidelines.

The XP-SNET controller has built-in relay output that can be configured as alarm output, time controlled output or general purpose output. You can even program an output to be triggered by an alarm event, such as in the case of connecting the relay output to a video recorder and the relay can then be used to trigger video recorder to record from a particular CCTV when an alarm occurs.

Most of the security devices such as smoke detectors, magnetic contacts, motion detectors, and seismic sensors can be connected to our alarm processor without any problem. The zone arming can be activated either manually, time zone controlled or group controlled.

The controller is connected to the computer for real time reporting and management. The Integrated Security Management System (ISMS) software continuously displays the status of each sensor either in text list form or in a floor plan mapping for ease of identification. The ISMS software can also be configured to sound an alarm in the computer whenever there is an alarm present.
 

  1. Acts as the central controller for the alarm events and output of the system
  2. 128 Sensor Inputs
  3. 128 Output Points
  4. Onboard Memory, Real-Time Clock, and Backup Battery
  5. Onboard Power Level Monitoring
  6. Power Input : 12VDC @ 500mA (Base Board Only)
XP-SNET-E32R XP-SNET-E248S
32 Relay Output Extension Board 24 Supervised Input/8 Relay Output Extension Board
Nil 24 Supervised Inputs
32 Relay Outputs 8 Relay Outputs
Power Level Monitoring Power Level Monitoring
Power Input : 12VDC @ 2A Power Input : 12VDC @ 2A

alarm-monitoring-config-diagram
 


RG-ES105GD. Ruijie 5-Port Gigabit Unmanaged Metal Switch. #ASIP Connect DS-2CE56H0T-ITZF. Hikvision 5MP Indoor Moto Varifocal Dome Camera FD816B-HT. Vivotek Fixed Dome Camera SHT-5181 GP-MH310 TS-919B1.Bridge Unit Fingertec OFIS-Y (SDK) / OFIS-Y TA Ubiquiti airFiber® AF-11G35 TL-R860 YS-11A.WALL MOUNTING BOX SHP-DP738. Samsung Premium Bluetooth Push-Pull Doorlock SCP-2371 ST-321B.TOA Microphone Stand WD MY CLOUD EX4100 8TB - WDBWZE0080KBK-SESN KM5020 AX-250PLUS / 500PLUS.OPTEX INFRAFRED PHOTOELECTRIC BEAM WV-CP500 DS-2CE16D8T-IT3ZF. Hikvision 2MP Ultra Low Light Moto Varifocal Turret Camera YF-120B.Blank Box PIXMA E4270 Canon Inkjet Printers WD Red 1TB NAS Hard Drive WD10EFRX DS-2CE56D1T-IT3.1080P TURBO HD EXIR TURRENT CAMERA