ASIP ENGINEERING (JB)
43A, Jalan Bukit Impian 1, Taman Impian Emas, 81300 Skudai, Johor, Malaysia.
ASIP ENGINEERING (KL)
Lot 3, Block B,
Subang Light Industrial Park,
Off Jalan Subang 2, USJ 1,
47610 Subang Jaya,
Selangor, Malaysia.
ASIP ENGINEERING (Perak)
14, Jalan Medan Ipoh 9,
Bandar Baru Medan,
31400 Ipoh,
Perak, Malaysia.
+6016-7333389
enquiry@asip.com.my
EGSH-8008. Elid Swing Gate
Barrier Gate --- ELID ---
Previous ‹‹ | » Next |
EGSH-8008 ELID Swing Gate is high tech barrier which mainly provides management for passageway. This product is exquisitely designed completely with high level of function which is suitable for high-end condominium, intelligent buildings, hotel and club, etc.
- Alarm function - When there is an unauthorised entry, alarm will trigger automatically and the motor will locked
- Swing gate can be easily configured with the mainboard installed within the body of the turnstile
- Swing gate able to detect tailgating or people walking on the different directions
- Swing gate always in the lock position. If there is any intrusion, the alarm will trigger
- The arm has the collision avoidance function: When the turnstile arm is closed, and under a collision, the arm will open to protect the motor
- Automatic Reset Functions: If you didn’t pass the turnstile within stipulated time ( 10s) after swipe your card, the system doesn’t allow you to pass through the turnstile
Housing material | Standard 304 stainless steel |
Thickness | 2.0mm thickness |
Working voltage | AC220±10%V 50±10%HZ |
Driving motor | Servo motor |
Size | L1600*W160*H1060mm |
Swing length | 290 mm |
Max Passage width | 1200mm |
Direction | single or bi-directional (optional) |
Working environment | indoor/outdoor (with a roof) -10°C~70°C |
Relative humidity | ≤90% coagulation free |
Time of opening/closing | 1 second |
Pass speed | 25-30 persons/min (closed) |
Time to work after power on | 3 seconds |
Reset time after break down | 10 seconds |
Normal running life | more than 5 million |
Communication interface | standard RS485 interface, distance ≤1200m |
Input interface | +12V level signal or pulse width >100ms 12V pulse, drive current >10mA |