         |
ASIP ENGINEERING (JB)
43A, Jalan Bukit Impian 1, Taman Impian Emas, 81300 Skudai, Johor, Malaysia.
ASIP ENGINEERING (KL)
Lot 3, Block B,
Subang Light Industrial Park,
Off Jalan Subang 2, USJ 1,
47610 Subang Jaya,
Selangor, Malaysia.
ASIP ENGINEERING (Perak)
14, Jalan Medan Ipoh 9,
Bandar Baru Medan,
31400 Ipoh,
Perak, Malaysia.
.png)
+6016-7333389
enquiry@asip.com.myA-1806.Mixer Power Amplifier
PA/Sound System --- TOA ---
| Previous ‹‹ | » Next |
Specification:
| Power Source |
220 V - 230 V AC, 50/60 Hz
24 V DC (M4 screw terminal)
|
| Rated Output | 60 W |
| Power/Current Consumption |
AC operation: 158 W (rated output), 66 W (EN60065),
24 V DC operation: 3.8 A (rated output), 1.6 A (EN60065)
|
| Frequency Response | 50 Hz - 20 kHz (±3 dB) |
| Distortion | 2 % or less at 1 kHz, rated power |
| Input |
MIC 1: -60 dB(*1), 600 Ω, electronically-balanced,
combined type of XLR-3-31 equivalent and phone jack, DIN socket (5 pins)
MIC 2 - 3: -60 dB(*1), 600 Ω, electronically-balanced,
combined type of XLR-3-31 equivalent and phone jack
AUX 1 (MOH): -20 dB(*1), 10 kΩ, unbalanced, RCA pin jack
AUX 2: -20 dB(*1), 10 kΩ, unbalanced, RCA pin jack
AUX 3: -20 dB(*1), 10 kΩ, unbalanced, combined type of XLR-3-31 and phone jack
TEL(*2): -20 dB(*1), 10 kΩ, electronically-balanced, M3 screw terminal
EMERGENCY: 0 dB(*1), 600 Ω, unbalanced, M3 screw terminal
|
| Output |
REC: 0 dB(*1), 600 Ω, unbalanced, RCA pin jack
LINE 1, 2 (*3): 0 dB(*1), 600 Ω, unbalanced, RCA pin jack
MOH: 0 dB(*1), 600 Ω, transformer balanced, M3 screw terminal
SPEAKER SELECTOR: 2 zone, high impedance (100 V line/167 Ω), individual selector switch,
M4 screw terminal
DIRECT SPEAKER OUT: High impedance (100 V line/167 Ω), M4 screw terminal
Low impedance (4 - 16 Ω), M4 screw terminal
(Both Low and High impedance terminals cannot be used at the same time.)
|
| Phantom Power | ON or OFF for each MIC1 - 3 with switch setting (+17 V DC) |
| S/N Ratio (Band Pass : 20 Hz - 20 kHz) |
100 dB or more (Master volume: min)
76 dB or more (Master volume: max)
60 dB or more (MIC 1 - MIC 3)
76 dB or more (AUX 1 - AUX 3)
90 dB or more (TEL)
96 dB or more (EMERGENCY)
|
| Tone Control | Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz |
| Control Input |
TEL: No-voltage make contact input, open voltage: 24 V DC, short-circuit: 5 mA or less,
M3 screw terminal
EMERGENCY(*4): No-voltage make contact input, open voltage: 24 V DC,
short-circuit: 10 mA or less, M3 screw terminal
|
| Control Output |
Power remote: Open collector output, withstand voltage: 35 V DC,
control current: 50 mA or less, M3 screw terminal
|
| Chime |
1-tone, 2-tone, or ascending 4-tone chime, or None selectable with switch setting,
activated at MIC 1's DIN or CONTROL TEL terminal.
|
| Indicator |
5 point LED output level meter, Power indicator LED, Zone indicator LED, Emergency LED,
TEL LED
|
| Priority |
EMERGENCY: Overrides other inputs
TEL: Overrides other inputs except 'EMERGENCY', ON/OFF selectable with switch setting
MIC 1: Overrides other inputs except 'EMERGENCY & TEL',
ON/OFF selectable with switch setting
|
| Operating Temperature | -10 ℃ to +40 ℃ |
| Finish |
Panel: ABS resin, black, hairline
Case: Steel plate, black
|
| Dimensions | 420 (W) × 107.7 (H) × 367 (D) mm |
| Weight | 9.4 kg |
| Accessory | Power cord ……1, Terminal block cover ……1, Terminal block cover mounting screw ……2 |
| Option |
Rack mounting bracket: MB-25B
Volume control cover: YA-920
Input transformer: IT-453A
|
![LS4600 [ 6 CH SPEAKER LINE SURVEILLANCE PANEL (VER.02) ]](http://www.newpages2u.com/resizetothumbnail/thumbnail.php?image=15411422727c8843d36b0deceafa632856c3a29705.png&new_width=200&new_height=90 "LS4600 [ 6 CH SPEAKER LINE SURVEILLANCE PANEL (VER.02) ]")
