VP-1061.Power Amplifier 60W (301H version) PA/Sound System TOA Johor Bahru JB Malaysia Supplier, Supply, Install, ASIP ENGINEERING

ASIP ENGINEERING (JB)
43A, Jalan Bukit Impian 1, Taman Impian Emas, 81300 Skudai, Johor, Malaysia.

ASIP ENGINEERING (KL)
Lot 3, Block B,
Subang Light Industrial Park,
Off Jalan Subang 2, USJ 1,
47610 Subang Jaya,
Selangor, Malaysia.

ASIP ENGINEERING (Perak)
14, Jalan Medan Ipoh 9,
Bandar Baru Medan,
31400 Ipoh,
Perak, Malaysia.

+6016-7333389

enquiry@asip.com.my

VP-1061.Power Amplifier 60W (301H version)

PA/Sound System --- TOA ---

Previous ‹‹

» Next

VP-1061.Power Amplifier 60W (301H version)

The VP-1061(301H) power amplifier can be used for rack-mount application.

Specification:

Power Source	AC: 230 V AC, 50/60 Hz DC: 24 V DC
Power Consumption	AC: 170 W (at rated output), 100 W (EN60065), 14 W (no-signal) DC: 4.5 A (at rated output), 0.1 A (no-signal)
Rated Output	60 W
Input	2 program inputs (parallel), 0 dB, 20 kΩ, balanced 2 priority inputs (parallel), 0 dB, 20 kΩ, balanced
Impedance	167 Ω (100 V)
S/N Ratio	80 dB or more
Total Harmonic Distortion	1 % or less (at rated output f = 1 kHz)
Frequency Response	80 Hz - 16 kHz, ±3 dB (at 1/3 rated output)
Ventilation	Fan cooling
Operating Temperature	0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity	90 %RH or less (no condensation)
Finish	Panel: Aluminum, black, alumite
Dimensions	210 (W) × 88.4 (H) × 338.7 (D) mm (8.27' × 3.48' × 13.33')
Weight	6.9 kg (15.21 lb)
Accessory	Power cable (2 m (6.56 ft)) …1, Removable terminal plug (2 pins) …2, Removable terminal plug (3 pins) …2, Removable terminal plug (5 pins) …2, Joint plate …1, Joint plate mounting screw …3, Fuse (1.25 A) …1
Option	Fault detector: YA-1000A Half width blank panel: MB-25B-BK (for rack mounting one VP-1061 unit) Rack joint bracket: MB-25B-J (for rack mounting two VP-1061 units)